| Power
Supply |
|
 |
DIN
Rail Mount 24VDC Power Supply [P0008]
120 to 230VAC primary power, 50 to 60Hz, converts to 24VDC regulated @
650mA - suitable for powering only one OMNEX transmitter or multiple
receivers.
|
| Antenna
Options |
|
 |
1/4
Wave Omni Antenna & 6" cable [ASSY-1214-01]
0dB gain whip antenna for REX-900 - c/w 3" 1/4 wave whip antenna, L
mounting bracket and 6' (2m) of RG-174 cable.
|
 |
1/4
Wave Omni Antenna & 6' cable [ASSY-1214-02]
0dB gain antenna for TEX-900, DX-900 & HS-900 RX - c/w 3" 1/4
wave whip antenna, L mounting bracket and 6' (2m) of RG174 cable.
|
 |
1/4
Wave Omni Antenna & 10' cable [A0005]
0db gain antenna with 10' (3m) of RG-58 cable, terminating with a BNC(M)
connection. Includes L mount bracket. Requires adapter cable to connect
to radio.
Note: Due to cable losses, should only be used for HS-900 & DX-900MA
distances <3 miles (4.8km) LOS, and TEX/REX-900 distances <0.5
miles (0.8km) LOS.
|
 |
1/4
Wave Omni Antenna & 25' cable [A0021]
0db gain antenna with 25' (7.6m) of RG-58 cable, terminating with a
BNC(M) connection. Includes L mount bracket. Requires adapter cable to
connect to radio.
Note: Due to cable losses, should only be used for HS-900 & DX-900MA
distances <1 mile (1.6km) LOS, and TEX/REX-900 distances <100 feet
(304m).
|
 |
5dB
Omni Base Station Antenna [A0017]
24" (61cm) mast with propeller type base with Type N(F) connection.
Includes "L" mount bracket.
|
 |
6dB
Yagi Antenna [A0012]
3 element yagi with Type N(F) connector. 7 1/4"W X 17 1/2"L.
Will require cable and adapter - see the following sections.
|
 |
10dB
Yagi Antenna [A0011]
7 element yagi with Type N(F) connector. Will require cable and adapter
- see the following sections.
|
 |
4-Way
Antenna Splitter [ASSY-2298-01]
The 4-Way Antenna Splitter allows 4 OMNEX HopLink receivers to share a
single antenna. Designed for use with HS-900 receivers, REX-900
receivers and DS-900 radios programmed to receive only, these splitters
can also be cascaded together to connect a maximum of 64 receivers to
one antenna (for best performance when cascading, the signal should not
pass through more than 3 splitters before reaching a receiver).
This
DIN rail mount product, with MCX(F) connectors for the antenna and
receivers, will perform amplification and impedance-matching functions,
and operates across a broad power supply and temperature range.
|
| Pigtail
Adapters & Connectors |
 |
Type
MCX(M) to BNC(F) adapter [ACAB-1410-03]
2' (60cm) pigtail adapter with RG-174 cable, MCX(M) to BNC(F), used with
HS-900, TEX-900, DS-900, DX-900MA or
DM-900.
|
 |
Type
MCX(M) to N(M) adapter [ACAB-1905-01]
4' (1.2m) adapter with RG316 type cable. Terminations are MCX(M) to Type
N(M), used for connecting an HS-900-R, TEX-900, DS-900, DX-900MA or
DM-900 to a surge suppressor/lightning arrestor.
|
 |
Type
SMA(M) to BNC(F) adapter [ACAB-1410-06]
2' (60cm) pigtail adapter with RG-174 cable, SMA(M) to BNC(F), used with
an HS-900-T.
|
 |
Type
SMA(M) to N(M) adapter [ACAB-1905-02]
4' (1.2m) adapter with RG-316 type cable. Terminations are SMA(M) to
Type N(M), used for connecting an HS-900-T to a surge
suppressor/lightning arrestor.
|
 |
Type
SMB(F) to BNC(F) adapter [ACAB-1410-04]
2' (60cm) pigtail adapter with RG-174 cable, SMB(F) to BNC(F), used with
REX-900.
|
 |
Type
SMB(F) to N(M) adapter [ACAB-1905-03]
4' (1.2m) adapter with RG-316 type cable. Terminations are SMB(F) to
Type N(M), used for connecting a REX-900 to a surge suppressor/lightning
arrestor.
|
 |
Type
MCX(M) to SMB(F) adapter [ACAB-1410-07]
2' (60cm) pigtail adapter with RG-174 cable, MCX(M) to SMB(F)
connections, used with the 4-way Antenna Splitter and up to 4
HS-900-R's.
|
 |
Type
SMB(F) to SMB(F) adapter [ACAB-1410-08]
2' (60cm) pigtail cable with RG-174 cable, SMB(F) to SMB(F) connections,
used with the 4-way Antenna Splitter and up to 4 REX-900's.
|
 |
Type
SMB(F) to BNC(M) adapter [ACAB-1410-02]
2' (60cm) adapter cable with RG174 cable, SMB(F) to BNC(M) connections,
used to cascade several 4-way Antenna Splitters.
|
 |
Type
N(F) to BNC(M) adapter [J0004]
Connector adapter to get from the BNC(F) on the 2' (60cm) pigtail to the
Type N(M) on the larger cables. Connections on the adapter are BNC(M) and
N(F). 1' (2.5cm) length.
|
| Antenna
Cable Options |
 |
RG-58
Cable [ACAB-1411-04]
Recommended for cable distances of less than 20' (6m). Cable loss is
16dB/100' (16db/30.5m). BNC(M) one end, and Type N(M) at the other.
|
 |
RG-213
Cable [ACAB-1412-01]
Recommended for cable distances of 20' (6m) to 50' (15m). Cable loss is
7.6dB/100' (7.6dB/30.5m). Type N(M) connectors on each end.
|
 |
LMR400
Cable [ACAB-1901-01]
Recommended for cable distances greater than 50' (15m) or where low
cable loss is required. Cable loss is 3.9dB/100' (3.9dB/30.5m). Type N(M)
connectors on each end.
|
 |
Lightning
Arrester [A0025]
Fully weatherized, maintenance free, compact lightning arrester with
multi-strike capability for the protection of any HopLink radio system.
For more Information view the technical
specifications,
view the data
sheet. |
